You can save time and money into remodeling when you replace your door to the room of your home. This is not a difficult task to complete, even if you have never done such a project in the past. When you buy the doors you want in a home improvement store, the dealer will give you advice on how to tackle this job. They will tell you the tools you need, including:
* Utility knife
* Circular saw
* Hammer
* plane
* Sandpaper
* screwdriver
* Chisel
It is also important to have a measuring tape.
Start by removing the old door. To do this, loosen the hinge of the door frame. You can take a hinge and latch of the door if you want them back on the new door. If you do not want to go over and dispose of them anyway, just leave them at the door.
Lay the new door at the top of the old door, making sure all edges are perfectly aligned. Mark the area where the new door hinges need to go. It will tell you if you cut any of the edges of the door that could be bigger than the old door. That is why you will need to saw and sandpaper. Use a utility knife or a marker to draw a line along each edge of the May need to be trimmed, making sure that they are straight.
Adding a new door hinges on the door handle and install. If you use a new handle, it is not necessary to replace the catch in the doorframe, as long as you put a button in the same place as it was in the old door. Rehang door to test fit. May you get a perfect first time or you May have to take the door down and make a few adjustments.
0Awesome Comments!